Effect of Current and Wire Speed on Surface Roughness in the manufacturing of Straight Gear using Wire-cut EDM Process

Rusdi, Nur and Muas, Muchtar and Muhammad, Arsyad Suyuti and Syah, Risal (2018) Effect of Current and Wire Speed on Surface Roughness in the manufacturing of Straight Gear using Wire-cut EDM Process. In: The 5th International Symposium on Material, Mechatronics and Energy 2018, November, 6-8 2018, Universitas Hasanuddin, Gowa,. (Submitted)

[img]
Preview
Archive (Artikel)
Paper ISMME 2018 Nur et al..pdf

Download (6MB) | Preview
[img]
Preview
Archive (Peer Review)
Peer Review ISMME 2018.pdf

Download (992kB) | Preview
[img]
Preview
Archive (Hasil Turnitin)
HAsil Turnitin ISMME 2018 Nur et al..pdf

Download (1MB) | Preview
[img] Archive
ISMME2018 Nur et al..docx

Download (167kB)

Abstract

The gears are an important part of a mechanism. Making gears requires high precision to avoid backlash. The machining process that can produce high precision is the process of Wire cut EDM. This study aims to determine the roughness of the workpiece surface and investigate the effect of current and wire speed on the roughness of the straight gear surface through wire cut machine EMS 45. The wire cut machining parameters used are 3, 5, and 7 amperes for current, and wire speed of 8, 10, and 12 mm/min. While the Wire material is a type of brass with 0.25 mm in diameter. The results presented that the increased use of current and wire speed will result in lower surface roughness, and vice versa. Therefore, it can be concluded that use low machine parameters to produce a smooth workpiece surface.

Item Type: Conference or Workshop Item (Paper)
Subjects: T Technology > TJ Mechanical engineering and machinery
Divisions: Department of Mechanical Engineering > Teknik Mesin
Depositing User: editor pnup
Date Deposited: 11 Feb 2019 03:22
Last Modified: 17 Jun 2019 06:53
URI: http://repository.poliupg.ac.id/id/eprint/853

Actions (login required)

View Item View Item