Search for collections on PNUP Repository

Chip Formation When Drilling AISI 316L Stainless Steel using Carbide Twist Drill

Sultan, Ahmad Zubair and sharif, Safian and Kurniawan, Denni Chip Formation When Drilling AISI 316L Stainless Steel using Carbide Twist Drill. Procedia Manufacturing, 2. pp. 224-229.

Warning
There is a more recent version of this item available.
[thumbnail of B-4.pdf] Text
B-4.pdf - Published Version

Download (769kB)
[thumbnail of B-4 merged.pdf] Text
B-4 merged.pdf

Download (2MB)

Abstract

Knowledge on the chip formation mechanism during drilling is very important to deliver the chips with size and shape as
expected. Long chips cannot rid smoothly over drill flutes hence should be avoided while small chips can be removed easily from
the machined hole. In this study, performance of a solid carbide twist drill through drilling of AISI 316L stainless steels was
evaluated in terms of chip formation. This study aims to better define and further characterize the different chips shape and
dimensions as a function of tool wear and cutting conditions in drilling the stainless steel. Experiments conducted on various
combinations of cutting speed (18 and 30 m min-1) and feed rate (0.03, 0.045 and 0.06 mm rev-1) to present the differences in
chip formation. Optical observation and comparative analysis of flank wear of the twist drill were done. As the results of the
performed experiments, the lowest cutting speed-lowest feed rate reveals better performance due to desirable chips formation on
austenitic stainless steels drilling.

Item Type: Article
Subjects: T Technology > TJ Mechanical engineering and machinery
T Technology > TS Manufactures
Divisions: Jurusan Teknik Mesin > D4 Teknik Manufaktur
Depositing User: Dr Phil Ahmad Zubair Sultan
Date Deposited: 08 Jun 2023 02:31
Last Modified: 08 Jun 2023 02:31
URI: https://repository.poliupg.ac.id/id/eprint/3104

Available Versions of this Item

Actions (login required)

View Item
View Item